SOLID WOOD GLUED PANELS

The trend of interior and exterior design in architecture is returning to natural materials. More and more people are therefore opting for natural materials; products that are friendlier to the environment in which people live. Solid wood glued panels are considered as such natural materials. Solid wood glued panels are sustainable and are becoming a leader in the new era of more environmentally friendly architecture and wooden construction.

From both a technical and aesthetic point of view, they are considered to be among the top high-quality products whose character is timeless above all and genuine.

Solid glued panels are available in various “shapes” (bonding methods), dimensions and tree species. They can actually be processed with the highest degree of creativity, taking into account the knowledge of solid wood.

In our offer, all panels are glued from solid wood, high quality, supplied as standard, raw – unprocessed, with sharp edges.

What are solid wood glued panels?

Solid wood glued panels are wood panels that are made from one type of wood. For this purpose, logs, planks are cut into lamellas. These lamellas are classified into certain quality categories in the production process and processed into edge-glued solid wood panels, finger-joint glued solid wood panels, three-layer solid wood panels, butcherblock, profi veneer, etc.

Edge-glued solid wood panels

Edge-glued solid wood panels are single-layer panels consisting of continuous wood lamellas that are glued across the edge with a blunt joint. That gives the result of a uniform appearance over the entire surface of the panel. In our program we offer three types of edge-glued solid wood panels, namely stair treads – steps, stair stringers – stringboards and furniture panels. The panels are divided according to their standard dimensions and basic use. However, you can also use them according to your needs.

Tree species: Beech, Oak, Maple, Ash, Alder, Acacia, Cherry, Birch, Walnut.

Stair treads

Length: 900 – 2000 mm
Width: 650 (700) mm
Thickness: 40, 45 mm

*thickness 50,55,60 etc. is possible on request

Stair stringers

Length: 2100 – 3500 mm
Width: 670 (700) mm
Thickness: 40, 45 mm

Furniture panels

Length: 900 – 3000 mm
Width: 600 – 1210 mm
Thickness: 19, 25, 30, 40 mm

Finger-joint glued solid wood panels

Finger-joint glued solid wood panels are single-layer panels consisting of discontinuing wood lamellas, first glued lengthwise with a toothed joint/finger joint into longer slats, and then edge-wise with a blunt joint. Compared to the edge-glued solid wood panels, the result of the appearance is therefore more varied. The panels are more stable. In our product program we offer panels with a standard lamella width of 40 mm and outside the standard lamella width of 20 mm.

Tree species: Beech, Oak, Maple, Ash, Alder, Acacia, Cherry, Birch, Walnut, Ami. Walnut, Iroko, Sapele.

Lamella width 40 mm

Length: 2500 – 5300 mm
Width: 600 – 1210 mm
Thickness: 19, 27, 32, 40, 45, 50, 55 mm

*special dimensions are possible on request

Lamella width 20 mm – narrow stave

Length: 2500 – 5300 mm
Width: 600 – 1210 mm
Thickness: 19 – 45 mm

*special dimensions are possible on request

Three-layer solid wood panels

3L three-layer solid wood panels are an aesthetically and technologically finished product. This is reflected in the high quality of the materials and the three-layer composition; the outer layers are made of veneer and the inner/middle layer is made of a finger-joint solid wood panel / plywood panel. Due to the method of bonding, three-layer panels are much more stable than finger-joint and edge-glued solid wood panels. In our product program we offer standard 3L solid wood panels with a veneer thickness of 5 mm, three-layer solid wood panels with a veneer thickness of 3 mm and 0.9 mm. The latter are an alternative and a novelty to the standard ones.

Tree species: Beech, Oak, Maple, Ash, Alder, Acacia, Cherry, Birch, Walnut, Ami. Walnut, Spruce.

Veneer 5 mm – standard

Length: 810 – 3000 mm
Width: 1250 mm
Thickness: 20/26 mm

Veneer 3 mm – middle layer spruce

Length: 2500/3000 mm
Width: 1250 mm
Thickness: 20 mm

Veneer 0.9 mm / 1.5 mm

Length: 2500/3000 mm
Width: 1220 mm
Thickness: 20 mm

Butcherblock End Grain

“BUTCHER BLOCK” is a unique product due to its special
visual structure and bonding method. It consists of smaller pieces of
lamellas that are glued frontally, lengthwise and then edgewise, with a blunt joint.

Tree species: Oak.

Profi veneer

These are thin lamellas of cut veneer, “leaves” of wood – logs. These lamellas of cut veneer are glued together across the edge into thin solid wood panels – profi veneer.

Tree species: Beech, Oak.